Product category
Conference, meeting and visitor chairs
Cantilever frames with no gas lift: nothing to leak, nothing to drift, and the lowest claim rate of anything we ship. Plus the executive chair that matches them at the head of the table.
MOQ 50 pcs | FOB Shenzhen · Guangzhou on request | Quote in 12 h
What this category covers
The specification behind the name
A meeting chair is sat in for forty minutes and then pushed under a table, and a visitor chair is sat in for ten. That usage pattern does not need a gas lift, which is the single most common failure point in cheap seating. The cantilever frame removes it, and a fixed height means nobody argues about who adjusted the chair. Thirty-four models in the catalogue use a cantilever frame. Ask for the cantilever sheet — we quote them against your room layout and table height.
- Chrome or black 25 mm cantilever frame
- No gas lift, no cylinder to fail
- 2 pcs per carton, 986 per 40HQ
- H1 for the head of the table
Specification
What is fixed, and what is not
A meeting chair is sat in for forty minutes and then pushed under a table, and a visitor chair is sat in for ten. That usage pattern does not need a gas lift, which is the single most common failure point in cheap seating. The cantilever frame removes it, and a fixed height means nobody argues about who adjusted the chair. Thirty-four models in the catalogue use a cantilever frame. Ask for the cantilever sheet — we quote them against your room layout and table height.
- Chrome or black 25 mm cantilever frame
- No gas lift, no cylinder to fail
- 2 pcs per carton, 986 per 40HQ
- H1 for the head of the table
- Models outside this list are quoted per order from the 125-model catalogue
- No model in this range carries a BIFMA X5.1 or EN 1335 report
Photographed at the partner factory. Same platform across the range.
Models
In this category
H1
Executive chair with headrest
Executive mechanism with tail plate and a wider back frame. A strong seller in the Gulf and West Africa.
521 pcs / 40HQ · 116–125 cm
Data
Specification summary
| Model | Back height | Armrests | Gas lift | 40HQ | Carton (cm) |
|---|---|---|---|---|---|
| H1 | 116–125 cm | Fixed PP | Class 2 · 85 mm | 521 | 69×32×59 cm |
Prices are quoted per enquiry. No model in this category carries a BIFMA X5.1 or EN 1335 report.
How to choose
Three things that decide the quotation
Tell us the room, the headcount and the destination port — the specification follows from those three.
Match the frame to the table base
Chrome frame with chrome legs, black with black. Mixed finishes are the most common specification mistake in a boardroom.
Visitor seating is not meeting seating
A visitor chair is used for ten minutes at a time; a meeting chair for an hour, twice a day. If the room is a waiting area, C1 is enough.
Fixed height is a feature
No adjustment means no drift over years of use, and no argument about who set the height.
Other categories
Compare with these
Mesh Office Chairs
Five models on one platform, 415 to 715 pieces per 40HQ.
5 models
Task & Staff Chairs
The chairs that fill the floor rather than the corner office: operator and task models priced per unit and per cubic metre, so a 200-seat rollout lands inside budget.
4 models
Executive Office Chairs
Wider back frame, executive mechanism with a tail plate, 320 mm chrome base.
2 models
Request a quotation
Need a quotation for Conference & Visitor Chairs?
Send the model, the quantity and the destination port. You get an itemised quotation sheet and a loading plan within 12 working hours.