A191
Mid-back mesh chair
The A191-H frame with the headrest taken off — for rooms where a low partition decides the chair, not the buyer.
1,028 pcs / 40HQ · 92–102 cm high
View A191 →A191 series · Model A191-H
High-back mesh chair with headrest
Two chairs to a carton and 1,028 to a 40HQ — the loading figure that decides what a headrest chair actually lands at.
- 2 pcs per carton, 1,028 pcs per 40HQ — the best loading of any headrest model here
- 57 cm wide frame: fits a 60 cm partition bay without fouling the return
- 310 mm five-star base, black castors, Class 2 gas lift with 100 mm stroke
- Butterfly mechanism with tension control; fixed PP armrests
Product specifications
Full specification, A191-H
| Model | A191-H |
|---|---|
| Type | High-back with headrest |
| Overall size (W × D × H) | 57 × 58 × 115-125 cm |
| Back | Black mesh over a moulded PP back frame, fixed headrest |
| Mechanism | Butterfly, 2.0 mm |
| Gas lift | Class 2, 100 mm stroke, black |
| Armrests | Fixed PP armrests |
| Base and castors | 310 mm five-star base, black castors |
| Seat foam | 40 mm recycled foam + 10 mm 30-density pure foam |
| Seat board | 10 mm plywood |
| Upholstery | Mesh |
| Carton | 58 × 40 × 57=2PCS cm |
| Pcs per carton | 2 |
| Volume per chair | 0.1322 cbm |
| Net / gross weight | 9 / 10 kg |
| 40HQ / 20GP | 1028 / 422 pcs |
Figures above come from the factory specification sheet for A191-H. Where a value is not listed — load rating, fabric composition, packaging test report — ask and we will quote it per order rather than publish a range.
Materials & construction
What it is actually made of
Back and frame
Black mesh stretched over a moulded PP frame with a lumbar panel formed into the moulding. The headrest is fixed to the frame, not bolted through the mesh, so it does not work loose in transit.
Seat and foam
40 mm recycled foam under 10 mm of 30-density pure foam, over a 10 mm plywood board. The pure foam layer is what stops the seat feeling like a board after a year.
Mechanism, base and castors
Butterfly mechanism with tension control, Class 2 gas lift at 100 mm stroke, 310 mm five-star base with black castors rated for hard floor and carpet.
Packing and loading
1,028 chairs to a 40HQ
1,028pcs / 40HQ
422pcs / 20GP
0.1322cbm per chair
9 kgnet weight
Two units share one 58 × 40 × 57 cm carton, which is why the 40HQ count reaches 1,028. Cartons are stackable four high and the headrest is protected by a moulded end cap.
Related products
Compare with these three
2103A
High-back mesh chair, single-handle mechanism
Single-handle mechanism with a tail plate: the recline stops where it is set instead of drifting, which is what a 200-seat tender actually asks for.
529 pcs / 40HQ · 115–125 cm high
View 2103A →
2002A
High-back mesh chair, butterfly mechanism
0.1008 cbm per unit and 674 to a 40HQ. This is the volume model: the one that makes a 500-seat rollout land inside budget.
674 pcs / 40HQ · 115–125 cm high
View 2002A →Ask for a quotation on the A191-H
Send the quantity, the destination port and any logo requirement. You get an itemised quotation sheet with the unit price, the loading plan and the fixed cost per chair — not a range.